Access Points

The Access Points together form the underlying infrastructure of the wireless network. They are responsible for communication with the sensors, bundling all information and directing it towards the Sensor Bridge, which then in turn communicates with the application software.

Highlights

  • Small, robust, vibration-resistant
  • Simple set-up
  • Unlimited spatial expandability
  • Long radio range (700 m outdoors, approx. 50 m indoors)
  • Minimal configuration due to dynamic self-organisation

The Access Points are installed throughout the transmission zone in order to guarantee reliable communication with every wireless sensor. One Access Point can receive signals from approx. 100 sensors.

An Access Point is responsible for certain sensors, determined automatically by the Sensor Bridge depending on the field strength measured. When a sensor transmits a signal, it communicates with the responsible Access Points in a predetermined order. If transmission to the first Access Point should fail, the second is automatically addressed, and so on. With an increasing number of Access Points, this procedure achieves maximum transmission reliability.

Power can be supplied via an external power supply or via PoE (Power over Ethernet) using an additional module. The power consumption of an Access Point is < 2 watts. The robust and dustproof housing of the Access Points (protection class IP 20) also makes them suitable for use in rough industrial environments.

Technical data

Network interface
10/100 Base-T Ethernet via RJ 45, optional WLAN (802.11 b/g/n)
Software interface
XML via HTTP(S), configuration via browser
Protocol
sWave.NET®
Frequency
868.3 MHz (EU, Switzerland) or 915 MHz (USA, Canada and Mexico) or 917 MHz (Brazil) or 916.5 MHz (Japan)
Antenna
SMA plug-in connector for external antenna 
Voltage supply
24 VDC via plug-in power supply
Degree of protection
IP 20 
Ambient temperature
0 °C … +55 °C
Mounting
screw connection or magnetic holder

Get in touch?

Please contact us!

Rob Hargis
Sales Engineer Logistic Solutions

+1 317 771-2041
rob.hargis@steuteusa.com

Michael Brand
Sales Engineer Logistic Solutions

+49 5731 745-326
m.brand@steute.com